Is not the --native-ctrls protocol fixed in v1.0 (if not I believe it is
fixed in cvs.) I know it was broken unfortunately in v0.9.10
Regards,
Curt.
On Wed, Apr 9, 2008 at 4:26 AM, Torsten Dreyer wrote:
> > *Master machine:*
> > *Slave machine:*
> > The most annoying problem with this setup is:
> > On "high" speed on ground (i.e. before take off) OR on low altitude
> 200-600
> > feet (before landing) the slave machine totally freezes.
> > Tested on few models: C172, PC7, A-10.
> > In some cases on higher altitude the displaying on slave machine
> revives.
> > Exit from FG on master machine during the flight, when slave is
> connected
> > and stuck, causes to slave to show "last picture".
>
> which protocol do you use to synchronize slave and master?
> what flightgear version?
>
> the --native protocol is broken, the --native-controls was broken some
> time
> ago
>
> Torsten
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
> Don't miss this year's exciting event. There's still time to save $100.
> Use priority code J8TL2D2.
>
> http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
> _______________________________________________
> Flightgear-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/flightgear-devel
>
--
Curtis Olson: http://baron.flightgear.org/~curt/
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
Flightgear-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/flightgear-devel
