> On Fri, 2009-03-13 at 14:41 +0100, Torsten Dreyer wrote:
> > > On Fri, 2009-03-13 at 11:27 +0000, Alasdair Campbell wrote:
> > > > I have noticed that the seneca's HSI is permanently stuck at 360°
> > > > Can someone please let me know if they experience the same problem?
> > > > In my case this problem has been present for a long time.
> > > > Can anyone help?
> > >
> > > Sorry, I forgot to mention I am using CVS/SVN for Plib, OSG, Singear
> > > and FG on a linux Debian box.
> >
> > Please check:
> > Is the gyro in slave mode? Check for the switch "Slave/Free" right of the
> > gma340 to be in "Slave" position.
> >
> > If so, check the console messages. Do you see
> >
> >
> > If so, are there any Nasal error messages?
> >
> > Torsten
>
> Thanks for the reply, Torsten.
>
> Whether slaved or free, the HSI resolutely ponts north.
>
> I do not see the "KCS55 pictorial navigation system initialized"
> message.
>
> No nasal eror messages are reported.
> Here follows the complete console output:
>
>       dominatrix:~>fgfs
>         Model Author:  Torsten Dreyer with a little help from DATCOM+
>         Creation Date: 2006-01-16
>         Description:   Model for a PA34-200T Seneca II
>       Httpd server started on port 5400
>       FGMultiplayMgr - No receiver port, Multiplayermode disabled
>       power up
>       creating PitotIcingHandler for /systems/pitot[0]
>       KI266 dme indicator #0 initialized
>
>
> Kind regards, Alasdair
OK - you don't have the nasal handler for the KCS55 slave gyro system running.
You said you have a CVS version of FlightGear. 
Please check, that you have the latest version of the Seneca checked out, too.
You might verify your Seneca-base.xml file. You probably don't see the lines
            <file>Aircraft/SenecaII/Systems/kcs55.nas</file>
            <script><![CDATA[
              KCS55.new();
            ]]></script>
somewhere at line number 390 ?
If so, perform a cvs up of your data tree, esp. the SenecaII directory and 
check for any error messages. If anything fails, completely remove the 
SenecaII directory and do a "cvs up SenecaII" from your Aircraft directory.

Hope, this helps

Torsten

------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
Flightgear-devel mailing list
Flightgear-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/flightgear-devel

Reply via email to