On Fri, 2009-03-13 at 17:41 +0100, Torsten Dreyer wrote:
> > On Fri, 2009-03-13 at 14:41 +0100, Torsten Dreyer wrote:
> > > > On Fri, 2009-03-13 at 11:27 +0000, Alasdair Campbell wrote:
> > > > > I have noticed that the seneca's HSI is permanently stuck at 360°
> > > > > Can someone please let me know if they experience the same problem?
> > > > > In my case this problem has been present for a long time.
> > > > > Can anyone help?
> > > >
> > > > Sorry, I forgot to mention I am using CVS/SVN for Plib, OSG, Singear
> > > > and FG on a linux Debian box.
> > >
> > > Please check:
> > > Is the gyro in slave mode? Check for the switch "Slave/Free" right of the
> > > gma340 to be in "Slave" position.
> > >
> > > If so, check the console messages. Do you see
> > >
> > >
> > > If so, are there any Nasal error messages?
> > >
> > > Torsten
> >
> > Thanks for the reply, Torsten.
> >
> > Whether slaved or free, the HSI resolutely ponts north.
> >
> > I do not see the "KCS55 pictorial navigation system initialized"
> > message.
> >
> > No nasal eror messages are reported.
> > Here follows the complete console output:
> >
> > dominatrix:~>fgfs
> > Model Author: Torsten Dreyer with a little help from DATCOM+
> > Creation Date: 2006-01-16
> > Description: Model for a PA34-200T Seneca II
> > Httpd server started on port 5400
> > FGMultiplayMgr - No receiver port, Multiplayermode disabled
> > power up
> > creating PitotIcingHandler for /systems/pitot[0]
> > KI266 dme indicator #0 initialized
> >
> >
> > Kind regards, Alasdair
> OK - you don't have the nasal handler for the KCS55 slave gyro system running.
> You said you have a CVS version of FlightGear.
> Please check, that you have the latest version of the Seneca checked out, too.
> You might verify your Seneca-base.xml file. You probably don't see the lines
> <file>Aircraft/SenecaII/Systems/kcs55.nas</file>
> <script><![CDATA[
> KCS55.new();
> ]]></script>
> somewhere at line number 390 ?
> If so, perform a cvs up of your data tree, esp. the SenecaII directory and
> check for any error messages. If anything fails, completely remove the
> SenecaII directory and do a "cvs up SenecaII" from your Aircraft directory.
>
> Hope, this helps
>
> Torsten
>
> ------------------------------------------------------------------------------
I do have the Seneca-base.xml file containing the lines you mention at
line 392. Also present is Aircraft/SenecaII/Systems/kcs55.nas containing
the line:
print( "KCS55 pictorial navigation system initialized" );
at line 395.
Will now attempt to delete and re-install the complete SenacaII
directory.
.... time passes
"cvs up SenecaII" does nothing in the Aircraft directory.
nor does "cvs co SenecaII"
"cvs update -dP" refreshes the folder and reinstalls the SenecaII
directory (along with every other aircraft).
Aha! Now I see the "KCS55 pictorial navigation system initialized" and
switching to "slave" frees the giro and all is OK.
All this is very odd since I regularly do a CVS/SVN update on everything
including the data directory, as I did prior to opening this thread. I
am losing faith in CVS... sigh.
Thank you for your help.
Kind regards, Alasdair
------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
Flightgear-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/flightgear-devel
