> Ok, quick test with a new pull and it seems like heading and speeds > are working for the layers now. The temperatures don't seem to be > taking though, same setup as previous and I was below zero celcius > before reaching 9000 feet and already nearly 9 below celcius at 12000 > feet. Not sure about other settings, dewpoint, turbulence, etc, didn't > play with those yet. I did notice altimeter wasn't coinciding with the > input values....though to be honest I'm not sure I fully understand > how the altimeter values are supposed work over altitude, temperature, > etc changes...in flightgear or real life. > Hmm - the temperature thing is a tricky one. There were some updates to the temperature/density calculations some time ago, so setting temperature at altitude don't give the expected result anymore. I'll think about it, but it will take some time to come up with a reasonable solution.
For the time being, entering temperature into the dialog box is broken. The only way to set a temperature is by setting /environment/temperature-sea- level-degc which calculates the temperature at altitude based on ICAO standard atmosphere. Torsten ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
