Renk Thorsten <thorsten.i.renk <at> jyu.fi> writes: > Tweaking the nasal codes might take some time, but i followed Renk said about the logging menu, and that seems to work by now. Maybe the next step will be modeling the whole FDM in matlab and then make the simulation in FG, that would allow to control every parameter from the outside, although i still have to figure how to do that.
Thank you very much for your help. Alvaro > > In addition to what Heiko said, Nasal script loops can be used to print any properties or functions of > properties under any set of pre-defined conditions with adjustible sampling interval on-screen. If you > re-direct console output to a file, you also get something that is plottable with minimum manual > postprocessing. I've used this in the past to check the environment simulation by plotting pressure or > windspeed graphs. > > * Thorsten > ------------------------------------------------------------------------------ > Minimize network downtime and maximize team effectiveness. > Reduce network management and security costs.Learn how to hire > the most talented Cisco Certified professionals. Visit the > Employer Resources Portal > http://www.cisco.com/web/learning/employer_resources/index.html > ------------------------------------------------------------------------------ Minimize network downtime and maximize team effectiveness. Reduce network management and security costs.Learn how to hire the most talented Cisco Certified professionals. Visit the Employer Resources Portal http://www.cisco.com/web/learning/employer_resources/index.html _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
