Hi Patrick, The problem is with your video card which is an integrated video adapter (the chip is on the motherboard). I do not believe it supports T&L or Direct 3d. Though the Intel IGP does not support T&L either, I have had much better luck in getting Flightgear to run on the Intel IGP than on VIA's.
I saw a lot of posts where some games just will not run on this video chipset. If I remember right, you can increase the memory allocated to video to 64MB, but I honestly do not think this will help. Can you do this: Start > Run > type "dxdiag", click OK Wait for it to finish scanning. Click on the Display tab Look at the section DirectX features - are Direct Draw, Direct3d and AGP Texture enabled? You can test each of them by clicking the test button next to each. My suggestion is to invest in an Nvidia GeForce graphics card. Check the system requirements at http://flightgear.org/hardwarereq.html. You should be able to get one for less than $100 USD that will do the job. You need to open up your PC case and see whether you have an AGP slot or if you will have to go with a PCI video card. Chris On 9/16/05, PV Ferrer <[EMAIL PROTECTED]> wrote: > Hi, > > They are as follows > > > Processor = AMD Athlon XP-M > RAM = 512MB > Video Card= VIA/S3G UniChrome Graphics, 32MB > Monitor= Digital Flat Panel (1024x768) Background Apps (tray icons) _______________________________________________ Flightgear-users mailing list [email protected] http://mail.flightgear.org/mailman/listinfo/flightgear-users 2f585eeea02e2c79d7b1d8c4963bae2d
