On September 16, 2005 04:32 pm, Mike Rawlins wrote: > Hi All, > > Despite a good-faith effort searching the mailing list > archives, I've been unable to get AI traffic working. > Can someone please provide a brief (2-3 sentences) > HowTo? The "AI" traffic is not really that advance at the moment. To see it working, first tune the com1 of your radio to the frequency of your airport. Then, in the menu, choose ATC/AI > ATC/AI Options. A dialog will pop up. You should select all the checkbox, and set the AI traffic density to 3. Wait a while and you should see AI aircrafts requesting for approach clearance.
> What I find really appealing would be this: Set up a > Cessna to do repeated touch and gos in a traffic > patten to 28L, and a 737 on approach (say from near > the outer marker) to 28R. I'd then fly into the > terminal environment (VFR of course) and have to watch > for traffic and enter the pattern. Going into 28R I'd > have to keep the speed up or else end up with a 737 in > my rear end. > > Is this possible? Not at the moment. > I've just installed a copy from CVS checkout, so I > have the latest additions. Don't really know much XML > but might be willing to try. XML will be useless for what you want to do. By the way, log on the server if you haven't already. ;-) Go on the IRC channel as well. You can then bug someone (possibly me) to be your ATC. ;-) Ampere _______________________________________________ Flightgear-users mailing list [email protected] http://mail.flightgear.org/mailman/listinfo/flightgear-users 2f585eeea02e2c79d7b1d8c4963bae2d
