On Thu, 2005-09-29 at 10:44 +0000, Niel Agenbag wrote: > Hi everyone, > > I am still relatively new to Flightgear and I have two questions regarding > its usage that someone can maybe fill me in on. > > 1. I would like to start the Bo-105 helicopter of YASIM with the > --in-air --altitude=3000 > option of the command line, but the helicopter is not in trim at this > condition. The trimmer also does not work for YASIM. I also pass values > to the engine but the rotors take time to spin up to flight rpm and in > that period the helicopter falls to the ground. > Any ideas?
Sorry I can't help on this one. I have started in mid air with fixed wing aircraft. The paramter was -vc=70 (This is in knots). Otherwise FlightGear starts the cessna with the engine off, you then have to get the engine started and pull out of the dive. Not fun. > 2. I would also like to fly with the "flight plan" command line option. > But I do not know how to use this option. I also need to know if you can > specify lattitude and longitude positions as waypoints in the flight plan. > Can someone help out or send a sample flight plan? > Neil, I did a quick Google search for FlightGear "flight plan" and someone asked the same thing earlier this year on this list. I suggest flightplanner on sourceforge.net could be worth while. If you figure it out, let me know. Gotta go to work. George Patterson _______________________________________________ Flightgear-users mailing list [email protected] http://mail.flightgear.org/mailman/listinfo/flightgear-users 2f585eeea02e2c79d7b1d8c4963bae2d
