-------- Original-Nachricht -------- Betreff: Re: [Flightgear-users] Getting engines to start on the pa24-250 and the pa28-161 Datum: Fri, 18 Jul 2008 20:11:35 +0200 Von: Georg Vollnhals <[EMAIL PROTECTED]> An: [EMAIL PROTECTED] Referenzen: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]>
Brian Keener schrieb: > Georg Vollnhals wrote: > >> Start pressing "CTRL + C", then you'll see all hotspots you can click on. >> Look down and select the fuel tank. Look forward left and engage the >> main-switch and the fuel-pump switch. Mixture should be full rich >> (position at the panel). >> Maybe Priming is the realistic way to proceed, I never did it. Just >> start the engines with the ignition lock. >> > > Too weird - that's what I did - engine just turns over. Fuel Gauge points > to front of aircraft - is it in the wrong position? The mix is the red > knob front right? > > This is the wrong position for the fuel tank selection. There are 3 positions clockwise you can select. If you want to know what tank you have selected, go via the main menu "equipment" => "fuel and payload". You can see what you have selected and how many fuel is remaining for the selected tank. Hope this helps Georg EDDW ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Flightgear-users mailing list Flightgear-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-users
