Thank you agian, but it doesn't still work. I think we can't get flows from switch6509 by activateing "ip route-catch flow" command on the VLAN, it just might be work well if we config this command in each switch port and turn off "switch" mode by "no switchport" command.
Reminding all commands I have used on the switch as the following: mls flow ip interface-full mls nde sender version 7 mls nde interface ip flow-export version 5 ip flow-export destination 203.119.8.140 9996 interface Vlan12 ip address 203.119.8.132 255.255.255.224 ip route-cache flow no logging event link-status load-interval 30 Kien. ----- Original Message ----- From: "Daniel J McDonald" <[EMAIL PROTECTED]> To: "Tran Kien" <[EMAIL PROTECTED]> Cc: "Flow-Tools" <[EMAIL PROTECTED]> Sent: Wednesday, August 18, 2004 11:40 PM Subject: Re: [Flow-tools] How to get flows on switch 6509? > On Wed, 2004-08-18 at 10:03, Tran Kien wrote: > > Thanks McDonal, but the netflow just only support for version 1; 5 and 6 not > > 7. > > Version 7 is supported for microflows using the > mls nde sender version 7 > global configuration command > > > Anh on the switch there isn't the "mls flow-export" command. > > right, I was doing it from memory, which really ain't so hot anymore. > The actual command is 'mls netflow', which I think is default. > > > > > Kien. > > > > > > ----- Original Message ----- > > From: "McDonald, Dan" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Wednesday, August 18, 2004 7:58 PM > > Subject: RE: [Flow-tools] How to get flows on switch 6509? > > > > > > > >From: Tran Kien > > > >I use Netflow 5.0 > > > > > > I think you have to use version 7 when trying to get local flows... > > > > > > >and configure on my switch6509 as the foloowing but I > > > >couldn't get any flow exchanged through switch. > > > > > > Isn't there an mls flow-export command as well? the ip flow-export and > > mls > > > flow-export are independent of each other.... > > > _______________________________________________ > > > Flow-tools mailing list > > > [EMAIL PROTECTED] > > > http://mailman.splintered.net/mailman/listinfo/flow-tools > > > > -- > Daniel J McDonald <[EMAIL PROTECTED]> > Austin Energy > > _______________________________________________ Flow-tools mailing list [EMAIL PROTECTED] http://mailman.splintered.net/mailman/listinfo/flow-tools
