Eric,
I'm the other guy Paul has been mentioning. I added an Intel 32GB X25-E
to a J4400 this morning. It's attached to an X4240 via an LSI 1068E
based HBA. The system is also running NexentaStor (again, based on b104
ON bits). I added the SSD as a slog device and have been running iozone
to generate activity, and FMA hasn't flagged the drive yet.
# ./diskstat /dev/rdsk/c3t48d0
nvlist version: 0
protocol = scsi
status = (embedded nvlist)
nvlist version: 0
command-length = 6
modepages = (embedded nvlist)
nvlist version: 0
informational-exceptions = (embedded nvlist)
nvlist version: 0
dexcpt = 0
logerr = 0
mrie = 0x6
test = 0
ewasc = 0
perf = 0
ebf = 0
interval-timer = 0x8000000
report-count = 0x0
changed = 0
(end informational-exceptions)
(end modepages)
logpages = (embedded nvlist)
nvlist version: 0
informational-exceptions = (embedded nvlist)
nvlist version: 0
length = 0xc
general = 1
(end informational-exceptions)
self-test = (embedded nvlist)
nvlist version: 0
(end self-test)
(end logpages)
gltsd = 1
(end status)
predictive-failure = (embedded nvlist)
nvlist version: 0
additional-sense-code = 0x0
additional-sense-code-qualifier = 0x0
(end predictive-failure)
faults = (embedded nvlist)
nvlist version: 0
predictive-failure = 0
(end faults)
This system also has an Intel 32GB X25-E installed in one of the
X4240's SAS slots, connected to the internal Adaptec RAID controller. No
FMA complaints there either.
# ./diskstat /dev/rdsk/c2t5d0
nvlist version: 0
protocol = scsi
status = (embedded nvlist)
nvlist version: 0
command-length = 6
modepages = (embedded nvlist)
nvlist version: 0
(end modepages)
(end status)
faults = (embedded nvlist)
nvlist version: 0
(end faults)
I'm in a position to run more tests if needed, as none of this hardware is in
production yet.
-phillip
_______________________________________________
fm-discuss mailing list
fm-discuss@opensolaris.org
