On 21 Jun 2011, at 17:39, Theresa Jayne Forster wrote: Hi Theresa
> I have a fo file with a block inside a b-c > > But on the pdf produced, I am not seeing the block on it. But I do see the > red border of the b-c And all text is missing, any ideas why? > > <snip /> > FO = > </fo:instream-foreign-object> Thanks! That's more like it! Even better --I should have stressed that-- would be the smallest complete FO document that demonstrates the problem (if it is possible to post that here without violating any confidentiality agreements...). That way, we can immediately run it through the debugger and see what's happening. Working off the posted fragment, I tried pasting it into a test template here, but did not succeed in reproducing the problem so far. The bottom-border of the b-c was not visible, but that is about all that disappeared on my end, and that can be explained by the fact that a height of 10mm is actually _just_ too little to hold a line with font-size 24pt (= 28.8pt, including half-leading, which is 10.16mm; if I make that 10.2mm, then the border renders properly, too). That said, I read in the other thread that you are currently transitioning from 0.20 to 1.0, and I am only looking at the latter. So, just to make sure we're not missing anything: To which version does this issue apply? Regards Andreas --- --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
