Hello, it's me again, I am back on this work and after several tests, I figured out that my area tree has only elements with absolute positioning, left and top offset explicitely precized. It is boring for me as I cannot work only on my specific block to adjust it (padding, height, etc.), I have to manage its offset and also to deal with every elements under it.
Is there a way to do it easily ? Or to generate an area tree with relative positioning for all elements ? Thanks in advance. Ronnie Georg Datterl-2 wrote: > > Hi Ronnie, > > That's only because you have not yet asked questions that need input from > the real experts here. :-) > > Regards, > > Georg Datterl > > ------ Kontakt ------ > > Georg Datterl > > Geneon media solutions gmbh > Gutenstetter Straße 8a > 90449 Nürnberg > > HRB Nürnberg: 17193 > Geschäftsführer: Yong-Harry Steiert > > Tel.: 0911/36 78 88 - 26 > Fax: 0911/36 78 88 - 20 > > www.geneon.de > > Weitere Mitglieder der Willmy MediaGroup: > > IRS Integrated Realization Services GmbH: www.irs-nbg.de > Willmy PrintMedia GmbH: www.willmy.de > Willmy Consult & Content GmbH: www.willmycc.de > -----Ursprüngliche Nachricht----- > Von: rOnnie974 [mailto:[email protected]] > Gesendet: Freitag, 5. Februar 2010 13:06 > An: [email protected] > Betreff: Re: AW: AW: AW: AW: Table height issue > > > You are my hero. > > Thank you very much. > > > Georg Datterl-2 wrote: >> >> Hi Ronnie, >> >> Basically: >> areaTree is the root. >> pageSequence is a page sequence from your fo file page is a single >> page in your pdf regionBefore is the header regionAfter is the footer >> regionBody is the body of the page >> >> then there's lots of stuff to ignore. To find the block you are >> interested in, search for the id. id="XXX" in fo will be translated to >> prod-id="XXX". >> bpd is block-progression-dimension, which means block height. >> >> In your code you can use Xpath to read information, but I'd advise you >> to trim the document first. If you know all information you need is in >> one page-sequence, trim away all other sequences to make xpath way >> faster. >> >> Regards, >> >> Georg Datterl >> >> ------ Kontakt ------ >> >> Georg Datterl >> >> Geneon media solutions gmbh >> Gutenstetter Straße 8a >> 90449 Nürnberg >> >> HRB Nürnberg: 17193 >> Geschäftsführer: Yong-Harry Steiert >> >> Tel.: 0911/36 78 88 - 26 >> Fax: 0911/36 78 88 - 20 >> >> www.geneon.de >> >> Weitere Mitglieder der Willmy MediaGroup: >> >> IRS Integrated Realization Services GmbH: www.irs-nbg.de >> Willmy PrintMedia GmbH: www.willmy.de >> Willmy Consult & Content GmbH: www.willmycc.de >> -----Ursprüngliche Nachricht----- >> Von: rOnnie974 [mailto:[email protected]] >> Gesendet: Freitag, 5. Februar 2010 12:48 >> An: [email protected] >> Betreff: Re: AW: AW: AW: Table height issue >> >> >> I just found xmlindent.com and got a 2656 lines file... Gonna a big >> headache%-| >> >> >> Georg Datterl-2 wrote: >>> >>> Hi Ronnie, >>> >>> I run the Document object through >>> >>> public static String toString(Document document) throws >>> TransformerException { >>> StringWriter stringWriter = new StringWriter(); >>> StreamResult streamResult = new StreamResult(stringWriter); >>> TransformerFactory transformerFactory = >>> TransformerFactory.newInstance(); >>> Transformer transformer = transformerFactory.newTransformer(); >>> transformer.setOutputProperty(OutputKeys.INDENT, "yes"); >>> >>> transformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amo >>> u >>> nt", >>> "2"); >>> transformer.setOutputProperty(OutputKeys.METHOD, "xml"); >>> transformer.transform(new >>> DOMSource(document.getDocumentElement()), streamResult); >>> return stringWriter.toString(); >>> } >>> >>> and copy the resulting String into XMLSpy. >>> >>> Regards, >>> >>> Georg Datterl >>> >>> ------ Kontakt ------ >>> >>> Georg Datterl >>> >>> Geneon media solutions gmbh >>> Gutenstetter Straße 8a >>> 90449 Nürnberg >>> >>> HRB Nürnberg: 17193 >>> Geschäftsführer: Yong-Harry Steiert >>> >>> Tel.: 0911/36 78 88 - 26 >>> Fax: 0911/36 78 88 - 20 >>> >>> www.geneon.de >>> >>> Weitere Mitglieder der Willmy MediaGroup: >>> >>> IRS Integrated Realization Services GmbH: www.irs-nbg.de >>> Willmy PrintMedia GmbH: www.willmy.de >>> Willmy Consult & Content GmbH: www.willmycc.de >>> -----Ursprüngliche Nachricht----- >>> Von: rOnnie974 [mailto:[email protected]] >>> Gesendet: Freitag, 5. Februar 2010 12:29 >>> An: [email protected] >>> Betreff: Re: AW: AW: Table height issue >>> >>> >>> THANK YOU for your complete answer ! >>> >>> Before you answered me, I made some researchs and succeeded in >>> generating an area tree file. >>> >>> Now I have to understand this file, and, before, to indent it ! FOP >>> made a file with the entire code in one line ! xD >>> >>> Thank you again. >>> >>> >>> Georg Datterl-2 wrote: >>>> >>>> Hi Ronnie, >>>> >>>> Basically (and simplified), in my case I have two colums and the >>>> shorter columns has to be extended. So I build my table with one >>>> block in each column. Each block is marked by an id. Then I >>>> serialize my table into a fo file and generate the area tree, an >>>> intermediate format between fo and pdf. This format is an xml tree >>>> with all the basic informations like page, column and line breaks, >>>> size of areas and so on. I search for the marked blocks, get their >>>> height and compare. Then I extend the smaller block in my original >>>> table and serialize again. Now I can generate the PDF and both >>>> columns have the same height. >>>> >>>> Problems: >>>> * I have to generate the area tree for each table. That takes some >>>> time. >>>> * One of my blocks contains a table, which gives basically >>>> unpredictable results if split over more than two pages. >>>> * What should happen if there's a page break after one column is >>>> already finished? In that case you won't find the block on the >>>> second page and extending the block might change the break position >>>> and then the calculated block height is incorrect. >>>> >>>> You should make REALLY sure you REALLY need that feature. >>>> >>>> http://markmail.org/search/?q=georg.datterl+from%3A%22Georg+Datterl% >>>> 2 >>>> 2 >>>> +list%3Aorg.apache.xmlgraphics.fop-users+type%3Ausers+date%3A200804- >>>> +2 >>>> +0 >>>> 1002++table >>>> >>>> that should give you a list of my postings talking about tables. >>>> Read at you own peril. :-) >>>> >>>> You can get the area tree with this code: >>>> >>>> FopFactory fopFactory = FopFactory.newInstance(); >>>> fopFactory.setUserConfig(new File("fonts/fop.xconf")); >>>> FOUserAgent foUserAgent = fopFactory.newFOUserAgent(); >>>> SAXTransformerFactory mpFactory = >>>> (SAXTransformerFactory)SAXTransformerFactory.newInstance(); >>>> Transformer transformer = mpFactory.newTransformer(); >>>> TransformerHandler handler = >>>> mpFactory.newTransformerHandler(); >>>> DOMResult domResult = new DOMResult(); >>>> handler.setResult(domResult); >>>> >>>> org.apache.fop.render.Renderer targetRenderer = >>>> foUserAgent.getRendererFactory().createRenderer( >>>> foUserAgent, MimeConstants.MIME_PDF); >>>> >>>> XMLRenderer renderer = new XMLRenderer(); >>>> renderer.mimicRenderer(targetRenderer); >>>> renderer.setContentHandler(handler); >>>> renderer.setUserAgent(foUserAgent); >>>> >>>> foUserAgent.setRendererOverride(renderer); >>>> >>>> Fop fop = fopFactory.newFop(foUserAgent); >>>> Result res = new SAXResult(fop.getDefaultHandler()); >>>> transformer.transform(source, res); // source is a >>>> StreamSource containing the fo file >>>> return (org.w3c.dom.Document)domResult.getNode(); >>>> >>>> Hope that helps. >>>> >>>> Georg Datterl >>>> >>>> ------ Kontakt ------ >>>> >>>> Georg Datterl >>>> >>>> Geneon media solutions gmbh >>>> Gutenstetter Straße 8a >>>> 90449 Nürnberg >>>> >>>> HRB Nürnberg: 17193 >>>> Geschäftsführer: Yong-Harry Steiert >>>> >>>> Tel.: 0911/36 78 88 - 26 >>>> Fax: 0911/36 78 88 - 20 >>>> >>>> www.geneon.de >>>> >>>> Weitere Mitglieder der Willmy MediaGroup: >>>> >>>> IRS Integrated Realization Services GmbH: www.irs-nbg.de >>>> Willmy PrintMedia GmbH: www.willmy.de >>>> Willmy Consult & Content GmbH: www.willmycc.de >>>> -----Ursprüngliche Nachricht----- >>>> Von: rOnnie974 [mailto:[email protected]] >>>> Gesendet: Freitag, 5. Februar 2010 11:43 >>>> An: [email protected] >>>> Betreff: Re: AW: Table height issue >>>> >>>> >>>> Thanks for your answer Georg. >>>> >>>> I did not find the threads you are talking about. >>>> >>>>> I create the table, parse the area tree and then insert empty >>>>> blocks with a calculated height to simulate that. >>>> Could you please explain me how to do that ? I am a beginner and do >>>> not know what area trees are. >>>> >>>> Thanks you in advance. >>>> >>>> >>>> >>>> Georg Datterl-2 wrote: >>>>> >>>>> Hi Ronnie, >>>>> >>>>>> Does not exist an attribute that would say to my table to extend >>>>>> it until there is no more available area on the last page ? >>>>> >>>>> Trust me, there is none. I create the table, parse the area tree >>>>> and then insert empty blocks with a calculated height to simulate >>>>> that. >>>>> You can search the archive for threads I started, many of them deal >>>>> with exactly that problem... >>>>> >>>>> Regards, >>>>> >>>>> Georg Datterl >>>>> >>>>> ------ Kontakt ------ >>>>> >>>>> Georg Datterl >>>>> >>>>> Geneon media solutions gmbh >>>>> Gutenstetter Straße 8a >>>>> 90449 Nürnberg >>>>> >>>>> HRB Nürnberg: 17193 >>>>> Geschäftsführer: Yong-Harry Steiert >>>>> >>>>> Tel.: 0911/36 78 88 - 26 >>>>> Fax: 0911/36 78 88 - 20 >>>>> >>>>> www.geneon.de >>>>> >>>>> Weitere Mitglieder der Willmy MediaGroup: >>>>> >>>>> IRS Integrated Realization Services GmbH: www.irs-nbg.de >>>>> Willmy PrintMedia GmbH: www.willmy.de >>>>> Willmy Consult & Content GmbH: www.willmycc.de >>>>> -----Ursprüngliche Nachricht----- >>>>> Von: rOnnie974 [mailto:[email protected]] >>>>> Gesendet: Freitag, 5. Februar 2010 05:32 >>>>> An: [email protected] >>>>> Betreff: Re: Table height issue >>>>> >>>>> >>>>> Hi, >>>>> >>>>> Thanks for your answer. >>>>> >>>>> Unfortunately, as I said, I write directly in XSL FO. It was >>>>> simplier for me to have the design I want, but perhaps I made a >>>>> mistake. >>>>> >>>>> Moreover, the height of each quote can change as they can have a >>>>> bigger description. Another difficulty is that the document can be >>>>> extended on several pages, and the header do not have to be repeated. >>>>> So the last page can be different than if it has only one. >>>>> >>>>> Does not exist an attribute that would say to my table to extend it >>>>> until there is no more available area on the last page ? >>>>> >>>>> >>>>> Venkat Reddy-7 wrote: >>>>>> >>>>>> Hi, >>>>>> >>>>>> May be, you can acheive this using your xslt file. >>>>>> I hope, you are using XSLT + XML to generate XSL:FO file. >>>>>> You can check the number of rows under each quote while generating >>>>>> the FO file, add the extra empty rows or increase the height of >>>>>> the last row when the script finds less no.of rows. >>>>>> >>>>>> Hope this will help you, >>>>>> Venkat. >>>>>> >>>>>> rOnnie974 wrote: >>>>>>> I am using the trunk version of FOP. >>>>>>> >>>>>>> here is a pdf I generated. >>>>>>> >>>>>>> https://www.yousendit.com/download/S1VEaUNGaTFoMlVLSkE9PQ >>>>>>> (available >>>>>>> 7 >>>>>>> days) >>>>>>> >>>>>>> I want that the second table can be extended to fill the entire >>>>>>> page. >>>>>>> >>>>>>> >>>>>>> Venkat Reddy-7 wrote: >>>>>>> >>>>>>>> Hi, >>>>>>>> >>>>>>>> Can you please provide an example doc what you are looking for? >>>>>>>> and also mention the version you are using... >>>>>>>> >>>>>>>> Thanks, >>>>>>>> Venkat. >>>>>>>> >>>>>>>> rOnnie974 wrote: >>>>>>>> >>>>>>>>> Hello, >>>>>>>>> >>>>>>>>> I make quote documents by writing directly in XSL-FO with a XML >>>>>>>>> behind. >>>>>>>>> >>>>>>>>> The number of rows is variable from one quote to another, so I >>>>>>>>> have to put some blank rows at the end of the table body before >>>>>>>>> the footer, so that the table takes the entire page. >>>>>>>>> >>>>>>>>> How can I make it dynamically ? Or do you see another solution >>>>>>>>> to this issue ? >>>>>>>>> >>>>>>>>> Thanks in advance. >>>>>>>>> >>>>>>>>> Ronnie Baret >>>>>>>>> >>>>>>>>> >>>>>>>> ---------------------------------------------------------------- >>>>>>>> - >>>>>>>> - >>>>>>>> - >>>>>>>> - >>>>>>>> - To unsubscribe, e-mail: >>>>>>>> [email protected] >>>>>>>> For additional commands, e-mail: >>>>>>>> [email protected] >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> ------------------------------------------------------------------ >>>>>> - >>>>>> - >>>>>> - To unsubscribe, e-mail: >>>>>> [email protected] >>>>>> For additional commands, e-mail: >>>>>> [email protected] >>>>>> >>>>>> >>>>>> >>>>> >>>>> -- >>>>> View this message in context: >>>>> http://old.nabble.com/Table-height-issue-tp27451583p27463438.html >>>>> Sent from the FOP - Users mailing list archive at Nabble.com. >>>>> >>>>> >>>>> ------------------------------------------------------------------- >>>>> - >>>>> - To unsubscribe, e-mail: >>>>> [email protected] >>>>> For additional commands, e-mail: >>>>> [email protected] >>>>> >>>>> >>>>> ------------------------------------------------------------------- >>>>> - >>>>> - To unsubscribe, e-mail: >>>>> [email protected] >>>>> For additional commands, e-mail: >>>>> [email protected] >>>>> >>>>> >>>>> >>>> >>>> -- >>>> View this message in context: >>>> http://old.nabble.com/Table-height-issue-tp27451583p27466097.html >>>> Sent from the FOP - Users mailing list archive at Nabble.com. >>>> >>>> >>>> -------------------------------------------------------------------- >>>> - To unsubscribe, e-mail: >>>> [email protected] >>>> For additional commands, e-mail: >>>> [email protected] >>>> >>>> >>>> -------------------------------------------------------------------- >>>> - To unsubscribe, e-mail: >>>> [email protected] >>>> For additional commands, e-mail: >>>> [email protected] >>>> >>>> >>>> >>> >>> -- >>> View this message in context: >>> http://old.nabble.com/Table-height-issue-tp27451583p27466541.html >>> Sent from the FOP - Users mailing list archive at Nabble.com. >>> >>> >>> --------------------------------------------------------------------- >>> To unsubscribe, e-mail: [email protected] >>> For additional commands, e-mail: >>> [email protected] >>> >>> >>> --------------------------------------------------------------------- >>> To unsubscribe, e-mail: [email protected] >>> For additional commands, e-mail: >>> [email protected] >>> >>> >>> >> >> -- >> View this message in context: >> http://old.nabble.com/Table-height-issue-tp27451583p27466728.html >> Sent from the FOP - Users mailing list archive at Nabble.com. >> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: [email protected] >> For additional commands, e-mail: [email protected] >> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: [email protected] >> For additional commands, e-mail: [email protected] >> >> >> > > -- > View this message in context: > http://old.nabble.com/Table-height-issue-tp27451583p27466906.html > Sent from the FOP - Users mailing list archive at Nabble.com. > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > > > -- View this message in context: http://old.nabble.com/Table-height-issue-tp27451583p27542599.html Sent from the FOP - Users mailing list archive at Nabble.com. --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
