Foreman 1.14.3 TFTP, DNS, DHCP, Puppet, Puppet CA, BMC, Logs, Discovery, Dynflow, and SSH
I currently have Foreman setup for discovery with host groups and discovery rules in place. I'm able to successfully auto-provision bare-metal hosts with two network interfaces via PXEBoot. I am, however, having issue auto-provisioning a SuperMicro, bare-metal host with 4 network interfaces and an IPMI interface. The host is "discovered" and if I select "Auto Provision" from the drop-down, Foreman carries on using the appropriate host group based on the correct discovery rules and reboots the host. However, the corresponding tftpboot/grub2/grub.cfg-xx-xx-xx-xx-xx-xx-xx file is never created and the host boots back into discovery. The issue is that the "domain", of the primary/provisioning interface, is never getting set automatically. If I manually provision the host via the "Provision" drop-down, rather than "Auto Provision", everything thereafter goes smoothly. Any insight into why the domain isn't getting set when the host is discovered/auto-provisioned would be greatly appreciated! Thanks Chad -- You received this message because you are subscribed to the Google Groups "Foreman users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/foreman-users. For more options, visit https://groups.google.com/d/optout.
