Chad, when you discover the host, do you see discovery_subnet fact? What's set?
Also can you send hammer CLI output of the discovered host or screenshot of UI? How interfaces were detected? I just installed stable version and trying to reproduce without any luck. LZ On Wed, Apr 5, 2017 at 2:17 PM, Chad Schroeder <[email protected]> wrote: > Yes, it is converted into a regular host after selecting "Auto provision". > Yes, I can select edit on the host and then submit without error. When done > that way, the domain for the primary/provisioning interface is the updated. > However, tftp orchestration remains unconfigured so the host will reboot > back into discovery. "Rebuild config" must be selected and executed in > order for the host to boot into the actually OS provisioning kickstart. > > On Wednesday, April 5, 2017 at 5:47:33 AM UTC-5, Lukas Zapletal wrote: >> >> Is the host getting "converted" into ordinary host? if so can you edit >> it and then submit save without changing any value, is there any >> error? >> >> On Tue, Apr 4, 2017 at 8:48 PM, Chad Schroeder >> <[email protected]> wrote: >> > Related: >> > https://groups.google.com/forum/#!topic/foreman-users/4qBQC9Y-zmg >> > >> > >> > On Tuesday, April 4, 2017 at 1:42:16 PM UTC-5, Chad Schroeder wrote: >> >> >> >> Foreman 1.14.3 >> >> TFTP, DNS, DHCP, Puppet, Puppet CA, BMC, Logs, Discovery, Dynflow, and >> >> SSH >> >> >> >> I currently have Foreman setup for discovery with host groups and >> >> discovery rules in place. I'm able to successfully auto-provision >> >> bare-metal hosts with two network interfaces via PXEBoot. >> >> >> >> I am, however, having issue auto-provisioning a SuperMicro, bare-metal >> >> host with 4 network interfaces and an IPMI interface. >> >> The host is "discovered" and if I select "Auto Provision" from the >> >> drop-down, Foreman carries on using the appropriate host group based on >> >> the >> >> correct discovery rules and reboots the host. >> >> >> >> However, the corresponding tftpboot/grub2/grub.cfg-xx-xx-xx-xx-xx-xx-xx >> >> file is never created and the host boots back into discovery. >> >> The issue is that the "domain", of the primary/provisioning interface, >> >> is >> >> never getting set automatically. If I manually provision the host via >> >> the >> >> "Provision" drop-down, rather than "Auto Provision", >> >> everything thereafter goes smoothly. >> >> >> >> Any insight into why the domain isn't getting set when the host is >> >> discovered/auto-provisioned would be greatly appreciated! >> >> >> >> Thanks >> >> Chad >> > >> > -- >> > You received this message because you are subscribed to the Google >> > Groups >> > "Foreman users" group. >> > To unsubscribe from this group and stop receiving emails from it, send >> > an >> > email to [email protected]. >> > To post to this group, send email to [email protected]. >> > Visit this group at https://groups.google.com/group/foreman-users. >> > For more options, visit https://groups.google.com/d/optout. >> >> >> >> -- >> Later, >> Lukas @lzap Zapletal -- Later, Lukas @lzap Zapletal -- You received this message because you are subscribed to the Google Groups "Foreman users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/foreman-users. For more options, visit https://groups.google.com/d/optout.
