This message is from the T13 list server.
>I didn't say where the XY bits would be located but I suggest they >should be in the PCI Bus Master Control Registers probably in the >Status register/byte. And then ATAPI devices can just have CD and IO copied (by smarter host adapters) into those bits... not a bad idea. More applicable if the XY reinvention of CD/IO follows the original a bit closer, of course. Dimiter -------------------------------------------------------------------- Dimiter Popoff Transgalactic Instruments, Gourko Str. 25 b, 1000 Sofia, Bulgaria http://transgalactic.freeyellow.com <---- now with the new Nukeman Email: [EMAIL PROTECTED], [EMAIL PROTECTED] Phone: 00359/2/9923340, 00359/2/566752, Fax: 00359/2/9540384 Subscribe/Unsubscribe instructions can be found at www.t13.org.
