This message is from the T13 list server.
At today's T13 meeting, this was discussed: (e.g. overlaping ATAPI cmds
using the Service/Release protocol)
The general concensus was that it be dropped for ATAPI, but keeping it for
queued DMA.
No action was taken, but an official proposal will be forthcoming to give
adequate
public notice and time for comment.
Thank You !!!
-----------------------------------------------------------------
Jim Hatfield
ATA Interface Firmware & T13 (ATA/ATAPI) Standards Representative
Seagate Technology LLC
e-mail: [EMAIL PROTECTED]
s-mail: 389 Disc Drive; Longmont, CO 80503 USA
voice: 720-684-2120
fax....: 720-684-2711
====================================================
|---------+---------------------------->
| | "Curtis Stevens" |
| | <[EMAIL PROTECTED]|
| | dc.com> |
| | Sent by: |
| | [EMAIL PROTECTED]|
| | rg |
| | |
| | |
| | 09/20/2004 06:22 |
| | PM |
|---------+---------------------------->
>------------------------------------------------------------------------------------------------------------------------------|
|
|
| To: "ATA (E-mail)" <[EMAIL PROTECTED]>
|
| cc:
|
| Subject: [t13] ATAPI Command Overlap and Queuing
|
>------------------------------------------------------------------------------------------------------------------------------|
Does anyone know if ATAPI overlap and queuing are used? If not this would
be a good opportunity to obsolete them.
------------------------------------------------
Curtis E. Stevens
20511 Lake Forest Dr. #C 214-D
Lake Forest, Ca. 92630
Phone: 949-672-7933
Cell: 949-307-5050
E-Mail: [EMAIL PROTECTED]
