What's with these KB issues? Am I not reading this right? On one hand they state it has been corrected in Protel 99 SE Service Pack 6. Immediately following, they state: "The reason for its occurrence is currently not known but investigation into the problem is being made. At present, there is no work around..." How can Protel correct for it with SP6, if they don't know why the problem occurs?? I'm confused!!! Tony Using the export to AutoCAD files (*.DXF,*.DWG) file type in Schematic, I receive an access violation under Windows 2000. What is the problem? Item ID: 2217 Product: Advanced Schematic 99SE (SP5) Date Reported: 03-Jul-00 Revision Date: 01-Nov-00 Item Category: Issue Summary: Using the export to AutoCAD files (*.DXF,*.DWG) file type in Schematic, I receive an access violation under Windows 2000. What is the problem? Details: Scenario: On a PC with Windows 2000 installed, doing the following results in an access violation. File Export Setup the file type and options, and confirm the export. It occurs for both outputs, DXF and DWG. Altering the settings in the dialog does not make a difference. Access violation at address 41303924 in module 'VCL30.dpl' in SchDwgUtility:ExportToDwg Comments: This has been corrected in Protel 99 SE Service Pack 6. Exporting from the Schematic Editor to DWG/DXF no longer gives an error on Windows NT/2000. The issue with exporting a schematic using the AutoCAD DXF/DWG interface only occurs when Protel 99 SE is run on Windows 2000 systems. The reason for its occurrence is currently not known but investigation into the problem is being made. At present, there is no work around, other than running the export DXF/DWG process from Protel Schematic on PCs with Windows 95, 98 or NT. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/subscrib.html * - or email - * mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
