On Tue, 22 May 2001 15:27:50 -0400, you wrote:
>When I "UPDATE PCB" I can see that the ratsnest for +5v and +12v
>are either not connected or VCC and GND of the IC are connected
>together but not connected to the rest of the VCC and GND nets.
Check the names of power pins on the symbols for your parts. A power pin
named VDD will not be connected to power nets named VCC or +5v even if that
is what you want.
It is quite common to have to short two power objects on the schematic such
as VCC and VDD.
Cheers, Terry.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
