Hi Julian, thanks for the quick reply! The links you mentioned are no good as I live in Australia. Whats the best settings in rtknavi to collect data? I assume I just set the output of rtknavi to file? On the rover should I enable corrections from the cors network as I do this? Or just use single mode?
cheers Grant On Wed, Jan 25, 2012 at 11:16 PM, julio menezes <[email protected]>wrote: > > > --- Em *qua, 25/1/12, Grant Oswald <[email protected]>* escreveu: > > > De: Grant Oswald <[email protected]> > Assunto: Re: [FOSS-GPS] Re: RTKLIB SKYTRAQ > Para: "Open Source GPS-related discussion and support" < > [email protected]> > Data: Quarta-feira, 25 de Janeiro de 2012, 8:53 > > Hello Julio and Volfeer, > Sorry for taking so long to reply. > I'm using the same gps as volfeer. Thats skytraq S1315F-RAW receiver. > Only available from 2 place's that I know. Skytraq sell an evaluation unit > for only $99 usd. Google their website. > > My government base station is more than 15 km's away and also my account > hasn't enabled rinex data. (what ever that is). How ever I do have a > government static survey marker at the end of my property. I have searched > the internet and found it's details. What would be the best approach to use > this as reference point? Do I put the gps antenna on this point and collect > data for 1 hour? What then? > > Hi Grant. > > Tks, about your systrack information. > It is quit hard to by a receicer here. Here our importation tax reach 300 > %, can you beleave that ? > > As you have a landmark, you should: > 1) Let your base station, where you plan, colecting data. > 2) Put your rover over the Landmark. > 3) collect static data by about 1 hour, counting after turn on the second > receiver. > the epoch rate can be 5 seconds. > > Any way, I think you can get CORS data from: > http://www.ngs.noaa.gov/CORS/ > Once identified your near station, download the RINEX data from: > ftp://www.ngs.noaa.gov/cors/rinex/2012/ > Select the julian day. > > good luck. > > julio menezes > > I am mounting my skytrack Venus638FLPx using an open hardware Arduino Uno > with a flash shield, I bought from sparkfun. I don't know if it has RAW > data, I hope so. > I bought, also an wire less Xbee 60W serie 1, it has 2Km range. > > > _______________________________________________ > This message is sent to you from [email protected] mailing list. > Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your > subscription > For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS > >
_______________________________________________ This message is sent to you from [email protected] mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
