Hi Willem, did you set up the output of RXM-RAW messages on both
receivers and RXM-SFRB message on one of them (preferably on the
receiver connected to the PC running rtknavi, to reduce the data
transfer load managed by tcpsrv-tcpclient)?. You also need to set the
"RAW" protocol mode on the ports used to output those messages in both
receivers.
Best regards,
Mauro Ugarte A.
On 08/05/12 09:47, Willem Dantuma wrote:
Hello All,
I'am trying to make a base station + rover setup with 2 Ublox EVK-6T
receivers and rtklib 2.4.1 all is going as expected thank to the great
posts on this list. but now i having some trouble and always get a (
no base station observation data for rtk message ) on the rover and
never getting a FIX ( only SINGLE).
This is my setup:
Base station
1 ublox EVK 6T + rtkrcv on linux
input 1 - serial
output 1 - tcpsvr
Rover
1 ublox EVK 6T + rtknavi on windows
input 1 - serial
input 2 - tcpclient
Rover is connecting to the server fine and messages are send to the
rover ( verified using the monitor in rtknavi ).
Any ideas are welcome...
Thanks in advance
Willem
_______________________________________________
This message is sent to you from [email protected] mailing list.
Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your
subscription
For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
--
Este correo electrónico y cualquier archivo adjunto son confidenciales
y son solamente para el uso del individuo o entidad a la que van dirigidos.
Si ha recibido este correo electrónico por error por favor notifique al
remitente. Este mensaje contiene información confidencial dirigida a la
persona implicada. Si usted no es esa persona no debiera diseminar,
distribuir o copiar este mensaje de correo electrónico.
_______________________________________________
This message is sent to you from [email protected] mailing list.
Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your
subscription
For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
