After some debugging i found the problem in rtkrcv which i use on linux, it was ignoring the outputstream format type, patch has been made and sent to rtklib_support.
So after this fix i tried again, but still the same erorr on rtknavi ( no base station observation data for rtk ) Now i'am logging the output from the two receivers so i can post it here. Regards, Willem On Tue, May 8, 2012 at 5:15 PM, Willem Dantuma <[email protected]> wrote: > In an atempt to do this i noticed that theoutput file format on linux > is different then the one on windows, so i copied the config file from > windows to linux and changed only the inputstr1-path and outstr1-path > parameters. and run it again on linux, but still the same. > > Part of outputfile on linux: > > % GPST latitude(deg) longitude(deg) height(m) Q ns sdn(m) > sde(m) sdu(m) sdne(m) sdeu(m) sdun(m) age(s) ratio > 1687 226218.000 53.268584079 5.988357950 37.4980 5 9 4.4337 > 3.0386 7.4300 -2.1866 -2.1381 3.5805 0.00 0.0 > 1687 226219.000 53.268611953 5.988335275 37.9644 5 9 4.4338 > 3.0387 7.4300 -2.1870 -2.1385 3.5807 0.00 0.0 > 1687 226220.000 53.268648828 5.988293098 41.4734 5 9 4.4340 > 3.0389 7.4299 -2.1874 -2.1389 3.5810 0.00 0.0 > 1687 226221.000 53.268683622 5.988271258 37.6624 5 9 4.4341 > 3.0390 7.4299 -2.1877 -2.1394 3.5813 0.00 0.0 > 1687 226222.000 53.268700110 5.988244670 37.1978 5 9 4.4342 > 3.0392 7.4298 -2.1881 -2.1398 3.5815 0.00 0.0 > .... > > Part of outputfile on windows: > > $GPGSA,A,1,,,,,,,,,,,,,,,*1E > $GPGSV,1,1,0,,,,,,,,,,,,,,,,*49 > > $GPRMC,145505.00,A,5316.1234464,N,00559.2913205,E,0.67,135.33,080512,0.0,E,A*39 > > $GPGGA,145505.00,5316.1234464,N,00559.2913205,E,1,09,1.0,-5.765,M,41.124,M,0.0,*60 > $GPGSA,A,3,09,12,15,17,18,22,26,27,28,,,,1.6,0.9,1.3*34 > $GPGSV,3,1,09,51,73,291,33,51,38,222,39,51,55,187,43,51,38,075,30*7C > $GPGSV,3,2,09,51,24,262,28,51,20,307,25,51,18,151,47,51,85,067,32*78 > $GPGSV,3,3,09,51,21,054,27,,,,,,,,,,,,*43 > > $GPRMC,145506.00,A,5316.1236852,N,00559.2909351,E,1.11,135.33,080512,0.0,E,A*3A > > $GPGGA,145506.00,5316.1236852,N,00559.2909351,E,1,09,1.0,-5.662,M,41.124,M,0.0,*65 > $GPGSA,A,3,09,12,15,17,18,22,26,27,28,,,,1.6,0.9,1.3*34 > $GPGSV,3,1,09,51,73,291,33,51,38,222,39,51,55,187,43,51,38,075,29*74 > $GPGSV,3,2,09,51,24,262,28,51,20,307,25,51,18,151,47,51,85,067,33*79 > $GPGSV,3,3,09,51,21,054,27,,,,,,,,,,,,*43 > > $GPRMC,145507.00,A,5316.1235756,N,00559.2919449,E,0.39,135.33,080512,0.0,E,A*37 > > $GPGGA,145507.00,5316.1235756,N,00559.2919449,E,1,09,1.0,-9.951,M,41.124,M,0.0,*60 > $GPGSA,A,3,09,12,15,17,18,22,26,27,28,,,,1.6,0.9,1.3*34 > $GPGSV,3,1,09,51,73,291,33,51,38,222,39,51,55,187,43,51,38,075,29*74 > $GPGSV,3,2,09,51,24,262,28,51,20,307,25,51,18,151,47,51,85,067,33*79 > $GPGSV,3,3,09,51,21,054,27,,,,,,,,,,,,*43 > > $GPRMC,145508.00,A,5316.1227814,N,00559.2929801,E,0.66,135.33,080512,0.0,E,A*3B > > $GPGGA,145508.00,5316.1227814,N,00559.2929801,E,1,09,1.0,-9.168,M,41.124,M,0.0,*64 > $GPGSA,A,3,09,12,15,17,18,22,26,27,28,,,,1.6,0.9,1.3*34 > $GPGSV,3,1,09,51,73,291,33,51,38,222,40,51,55,187,43,51,38,075,29*7A > $GPGSV,3,2,09,51,24,262,28,51,20,307,25,51,18,151,47,51,85,068,33*76 > $GPGSV,3,3,09,51,21,054,26,,,,,,,,,,,,*42 > > $GPRMC,145509.00,A,5316.1226892,N,00559.2927608,E,1.23,135.33,080512,0.0,E,A*3C > > $GPGGA,145509.00,5316.1226892,N,00559.2927608,E,1,09,1.0,-9.494,M,41.124,M,0.0,*65 > $GPGSA,A,3,09,12,15,17,18,22,26,27,28,,,,1.6,0.9,1.3*34 > $GPGSV,3,1,09,51,73,291,33,51,38,222,39,51,55,187,43,51,38,075,29*74 > $GPGSV,3,2,09,51,24,262,28,51,20,307,26,51,18,151,47,51,85,068,33*75 > $GPGSV,3,3,09,51,21,054,26,,,,,,,,,,,,*42 > > > any ideas ? > > > regards, > > Willem > > > On Tue, May 8, 2012 at 4:03 PM, Timo Juhani Lindfors <[email protected] > > wrote: > >> Willem Dantuma <[email protected]> writes: >> > Any ideas are welcome... >> >> Can you try offline processing? Just record data on both base and rover >> to a file for several hours and then use rnx2rtkp? You can also publish >> the raw data so that others can study it. >> > >
_______________________________________________ This message is sent to you from [email protected] mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
