What about Raspberry Pi and Beaglebone Black?
Danny
On 8/21/2013 7:42 PM, Josh Leighton wrote:
While I can't speak very scientifically, I can report on our
experiences running rtklib on gumstix embedded linux computers.
Previous we used a Gumstix Overo with an ARM cortex-A8 (single core)
at 800MHz I believe. We couldn't reliably do more than 1Hz RTK
alongside the other processes we were running. If I recall correctly,
rtknavi was using ~15% cpu at 1Hz.
Now with a Duovero (dual core, arm cortex-A9 at 1GHz) we have no
problem running RTK at 5Hz. Cpu usage is still around 15%.
Hope that's of some help to you.
-Josh
On Wed, Aug 21, 2013 at 8:19 PM, Weber <[email protected]
<mailto:[email protected]>> wrote:
Hi all,
Question: How much processing power to get real time RTK
corrections from RTKLib?
I'm thinking of using uBlox LEA-6T-0 (5 Hz RAW update) on both
basestation and rover (a UAV), with RTKNAVI or an adaptation
running on the rover so I need to choose a onboard computer capable.
Thanks,
Weber
_______________________________________________
This message is sent to you from [email protected]
<mailto:[email protected]> mailing list.
Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage
your subscription
For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
_______________________________________________
This message is sent to you from [email protected] mailing list.
Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your
subscription
For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
_______________________________________________
This message is sent to you from [email protected] mailing list.
Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your
subscription
For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
