I didn't get your question properly. But as far as I could get u, all you want is to retain a mac address (not the default) even after you reboot the system. If that is the case, you can refer to a post on my blog at:
http://techwithfun.blogspot.com/2007/08/changing-mac-address.html Regards, - Jitendra. On Sat, Nov 8, 2008 at 10:33 PM, VCG(virus) <[EMAIL PROTECTED]> wrote: > > I have been using Ubuntu. I have two NICs. Sometimes i change the MAC > and use but when the system is rebooted or logout and login or > sometimes on restart too, the MAC C with eth0 and eth1 gets > changed.like if i have MAC add of 000060660021 of eth0 then on reboot > the eht0 is down and the eth1 gets that same MAC and eth0 > becomes ....as > > eth0_rename Link encap:Ethernet HWaddr 00:60:6e:00:00:36 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:9 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 B) TX bytes:1416 (1.3 KB) > Interrupt:221 Base address:0xa000 > > and it doesnt work on eth0. I need to change eth1 from eth0 on /etc/ > ppp/peers/dsl-provider. > > What is the cause ??? > > > --~--~---------~--~----~------------~-------~--~----~ FOSS Nepal mailing list: [email protected] http://groups.google.com/group/foss-nepal To unsubscribe, e-mail: [EMAIL PROTECTED] Community website: http://www.fossnepal.org/ -~----------~----~----~----~------~----~------~--~---
