Thanks for your time and information, I am searching with that. ShibaRatna ji, is that file permanent or it changes with the boot. manoj Ji, what is the attached document i could not get that... till now i am not solved...
On Nov 11, 9:22 pm, SATA <[EMAIL PROTECTED]> wrote: > On Tue, Nov 11, 2008 at 11:31 AM, manoj dahal <[EMAIL PROTECTED] > > > wrote: > > hi to all, > > hi Mr. Manoj, > What is that in the attachment? > > > > > > > On 11/10/08, ShibaRatna Tamrakar <[EMAIL PROTECTED]> wrote: > > > I think you should check your MAC Address in > > > /etc/udev/rules.d/70-persistent-net.rules file. It contains information > > that > > > linux used when linux reboots. > > > > may be helpful. > > > > regard, > > > cba > > > > On Sat, Nov 8, 2008 at 10:33 PM, VCG(virus) <[EMAIL PROTECTED]> wrote: > > > >> I have been using Ubuntu. I have two NICs. Sometimes i change the MAC > > >> and use but when the system is rebooted or logout and login or > > >> sometimes on restart too, the MAC C with eth0 and eth1 gets > > >> changed.like if i have MAC add of 000060660021 of eth0 then on reboot > > >> the eht0 is down and the eth1 gets that same MAC and eth0 > > >> becomes ....as > > > >> eth0_rename Link encap:Ethernet HWaddr 00:60:6e:00:00:36 > > >> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > >> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > > >> TX packets:9 errors:0 dropped:0 overruns:0 carrier:0 > > >> collisions:0 txqueuelen:1000 > > >> RX bytes:0 (0.0 B) TX bytes:1416 (1.3 KB) > > >> Interrupt:221 Base address:0xa000 > > > >> and it doesnt work on eth0. I need to change eth1 from eth0 on /etc/ > > >> ppp/peers/dsl-provider. > > > >> What is the cause ??? > > -- > With Regards, > Suraj Sapkota > सुरज सापकोटा --~--~---------~--~----~------------~-------~--~----~ FOSS Nepal mailing list: [email protected] http://groups.google.com/group/foss-nepal To unsubscribe, e-mail: [EMAIL PROTECTED] Community website: http://www.fossnepal.org/ -~----------~----~----~----~------~----~------~--~---
