On Thu, Dec 23, 2004 at 10:23:14PM +0100, Gunther Stammwitz wrote: > I'm going to buy a foundr bigiron 4000 that is going to be used as a router > for up to 200 megabits of traffic (about 25k pps) using bgp4. I need two > gigabit-uplink-ports. > > My current wishlist can be found below. I'd appreciate your feedback.. Are > there any drawbacks regarding my choice of modules? > > B4000 with dual-AC > J-FxGMR4 with 256 MB of Ram and 4 mini-gbics > Fi3L3UR-PROM upgrade.
> Does anyone know if I can get future software upgrades without a support > contract? If you are brave enough you could run HP's software images on your Foundry Equipment. These are BigIron images so I don't know if they have the same functionality as a FastIron (as your modules are all FastIron modules) -- Cliff Albert <[EMAIL PROTECTED]> From [EMAIL PROTECTED] Mon Dec 27 12:53:04 2004 From: [EMAIL PROTECTED] (Cliff Fogle) Date: Mon Dec 27 12:53:27 2004 Subject: [f-nsp] Question regarding my wishlist Message-ID: <[EMAIL PROTECTED]> It sounds like you just want Bronze support which I don't think is too expensive. You get Warranty software upgrade access for one year I believe. (Using your serial number as login and password): http://www.foundrynet.com/services/servicePrograms/bronze.html You probably want: 1 x BI4000 Chassis 1 x RPS3 90-220VAC Power Supply for BigIron 4000 & BigIron 8000 1 x J-BxGMR4 8-port mini-GBIC based Gigabit management module 4 x E1MG-SX 1000Base-SX mini-GBIC optic, MMF, LC connector -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gunther Stammwitz Sent: Thursday, December 23, 2004 1:23 PM To: [email protected] Subject: [f-nsp] Question regarding my wishlist Hello Colleagues, I'm going to buy a foundr bigiron 4000 that is going to be used as a router for up to 200 megabits of traffic (about 25k pps) using bgp4. I need two gigabit-uplink-ports. My current wishlist can be found below. I'd appreciate your feedback.. Are there any drawbacks regarding my choice of modules? B4000 with dual-AC J-FxGMR4 with 256 MB of Ram and 4 mini-gbics Fi3L3UR-PROM upgrade. Does anyone know if I can get future software upgrades without a support contract? The chassi is brand new. So I should be able to get a support contract, right.. If so? who's the best reseller? Thanks, Gunther _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
