Cliff's right, you need BigIron. FastIron will NOT run BGP, with or without the L3 upgrade.
Mike On Mon, 27 Dec 2004 09:53:04 -0800, Cliff Fogle <[EMAIL PROTECTED]> wrote: > It sounds like you just want Bronze support which I don't think is too > expensive. You get Warranty software upgrade access for one year I > believe. (Using your serial number as login and password): > http://www.foundrynet.com/services/servicePrograms/bronze.html > > You probably want: > > 1 x BI4000 Chassis > 1 x RPS3 90-220VAC Power Supply for BigIron 4000 & BigIron 8000 > 1 x J-BxGMR4 8-port mini-GBIC based Gigabit management module > 4 x E1MG-SX 1000Base-SX mini-GBIC optic, MMF, LC connector > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Gunther > Stammwitz > Sent: Thursday, December 23, 2004 1:23 PM > To: [email protected] > Subject: [f-nsp] Question regarding my wishlist > > Hello Colleagues, > > I'm going to buy a foundr bigiron 4000 that is going to be used as a > router for up to 200 megabits of traffic (about 25k pps) using bgp4. I > need two gigabit-uplink-ports. > > My current wishlist can be found below. I'd appreciate your feedback.. > Are there any drawbacks regarding my choice of modules? > > B4000 with dual-AC > J-FxGMR4 with 256 MB of Ram and 4 mini-gbics Fi3L3UR-PROM upgrade. > > Does anyone know if I can get future software upgrades without a support > contract? > The chassi is brand new. So I should be able to get a support contract, > right.. If so? who's the best reseller? > > Thanks, > Gunther > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp >
