On Wed, 30 Mar 2005, Tuc wrote: > I'm doing Interfaces as part of Vlans,
different > ospf (Which might come out in this new config, haven't decided yet), mainly the same, check default metrics > BGP with redistributes same except no spaces in descs, and on route-map put 'in'/'out' before the route-map name instead of after > and route maps (BOY are there route-map's), same (you'll be glad to hear!) > and community lists, and prefix-lists, and as-paths, same same same > and prepending and setting communitys and > adding communities and lots of metrics and local pref's..... same same same, make sure your default metrics are the same > > Interface syntax is almost the same, VLAN config is totally different. > > > Where can I find out more about the VLAN stuff? We assign the IPs > in the VLANs and ospf priority and vtp-domain. conf t # vlan blah name foo (vlan)# tag eth 1/2 (vlan)# router-interface ve 34 # int ve 34 (int) # ip add w.x.y.z etc Steve > > > > But it would be pretty easy to build a perl script that would convert > > Foundry 2 Cisco style (and the other way around). > > > I don't mind doing it by hand, unless there is a text somewhere > that explains... If you have KEYWORD OPTION OPTION change it to > OTHERKEYWORD default OPTION backwardsnetmask. :) > > Thanks, Tuc > _______________________________________________ > foundry-nsp mailing list > foundry-nsp at puck.nether.net > http://puck.nether.net/mailman/listinfo/foundry-nsp >
