You can't configure a layer 2 vlan to participate in ospf. However, you can configure a virtual layer 3 interface for that vlan that can participate using VE and tagging the layer 2 vlan with a router-interface. The configuration for the ve is pretty much identical to configuring a physcial interface.
vlan 20 name test-vlan by port tagged ethe 1/1 ethe 1/4 ethe 1/6 to 1/8 untagged ethe 1/3 ethe 3/3 to 3/15 ethe 3/18 to 3/19 router-interface ve 20 interface ve 20 ip address x.x.x.x 255.255.254.0 ip address x.x.x.x 255.255.255.0 ip pim-sparse ip helper-address 1 x.x.x.x ip helper-address 2 x.x.x.x ip ospf area 0.0.0.0 ip ospf passive Tuc wrote: >>> I'm doing Interfaces as part of Vlans, >> >>different >> > > So far its worked out pretty well for this. > >>>ospf (Which might come out in this new config, haven't decided yet), >> >>mainly the same, check default metrics >> > > This is what I'm working on now.... I can't assign an area to > a VLAN?? It has to be per port? I used to put "ip ospf network > point-to-multipoint" in Vlan1. I wanted to do the point-to-point, but > it definitely states it can't be VLAN'd. > > Thanks, Tuc/TTSG Internet Services, Inc. > _______________________________________________ > foundry-nsp mailing list > foundry-nsp at puck.nether.net > http://puck.nether.net/mailman/listinfo/foundry-nsp -- ***************** Tim Coble Network Specialist University of Pennsylvania, ISC Network Operations Center Email: tcoble<AT>isc.upenn.edu ******************
