We recently received a Server Iron Switch (16 10/100 + 2 Geth), i configured this switch to do NAT for our networks, but we are experimenting service instablility when we use as gateway the Server iron, some times is very show and then few moments later is very fast. We want to replace a Cisco 3845 that is doing NAT translation with this equipment but we can?t move to production this equipment.
The Software version is 07.5.00T12, and the config related to nat is the following, actually we have only nat in this equipment. I tried to setup the timeout for nat session and we don?t get any changes. What could be cause this issue ? vlan 200 name RED_PUBLICA by port untagged ethe 16 router-interface ve 1 ! vlan 199 name RED_PRIVADA by port untagged ethe 15 router-interface ve 2 ! ip nat inside ip nat inside source list 10 pool NAT1 overload ip nat pool NAT1 200.62.80.3 200.62.80.4 prefix-len 29 ip default-gateway 200.62.80.1 ip dns domain-name alfanumeric.com.ni ip dns server-address 200.62.65.1 interface e 15 speed-duplex 100-full ! interface e 16 speed-duplex 100-full ! interface ve 1 ip address 200.62.80.2 255.255.255.248 ! interface ve 2 ip address 192.168.4.254 255.255.255.0 ! access-list 10 permit 192.168.4.0 0.0.0.255 ! -------------- next part -------------- An HTML attachment was scrubbed... URL: https://puck.nether.net/pipermail/foundry-nsp/attachments/20060807/22b7ac8d/attachment.html
