Hi,
During our migration form L2 to MPLS switched network we used "local"
VPLS instances (VPLS without remote peers) to close L2 ring. On our XMRs
the L2 BPDUs were transmitted transparently. It was log time ago so
there was not possible to bind spanning-tree to VPLS. Currently as far
as I know it is possible to bing VPLS instance to topology group.
Today all our XMRs are working as P and PE routers. What you mean about
L2 ring? In our network XMRs are connected only with L3 (with MPLS)
interfaces and all L2 traffic is transmitted as VLL or VPLS service.
best regards
Tomek
Lazuardi Nasution pisze:
Hi,
Anyone has experience with deploying MPLS but without putting any
Provider (P) Router ? Let assume that there are only small numbers of
NetIron MLX/XMR Routers act as Provider Edge (PE) Router and which are
connected as a L2 Ring.
Best regards,
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
