It's supported on the BI-RX as well. On the SX it's unsupported
Ronald Van: Frank Louwers [mailto:[EMAIL PROTECTED] Verzonden: woensdag 29 oktober 2008 8:48 Aan: [email protected] CC: Ronald Esveld; Charles Ball Onderwerp: Re: [f-nsp] foundry equivalent of allowas-in On 27 Oct 2008, at 18:09, Charles Ball wrote: I found this in the 3.8 manual for xmr/mx: Configuring a PE to Allow Routes with its AS Number BGP rejects routes that contain its own AS number within its AS_PATH attribute to prevent routing loops. In an MPLS/VPN hub and spoke topology this can stop legitimate routes from being accepted. The allowas-in command fixes this problem by allowing you to set a parameter that disables the AS_PATH check function for routes learned from a specified location. To configure a PE to disable the AS_PATH check function for routes sent to it by its BGP neighbor (a CE router with the IP address 33.33.36.2) for a maximum limit of 3 occurrences of the route, enter the following command at the BGP VRF configuration level. NetIron(config-bgp-ipv4u-vrf)# neighbor 33.33.36.2 allowas-in 3 It seems this is a MRX/MX feature only? Any ideas how to do this on a BigIron? Regards, Frank Met vriendelijke groet, With kind regards, Ronald Esveld network engineer Qi ict Delftechpark 35-37 Postbus 402, 2600 AK Delft T : +31 15 888 0 444 F : +31 15 888 0 445 E : mailto:[EMAIL PROTECTED] I : http://www.qi.nl/ Qi ict evenementen: Qi ict op de http://www.qi.nl/cms/publish/content/showpage.asp?pageid=431
<<image/gif>>
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
