Colin,
Rate-limit is different feature than traffic shaping. You can apply VALN
based RL, but as far as I know on XMRs it is not possible for traffic
shaping. Traffic shaping can be applied only per-port.
Tomek
If you then wish to rate-limit all traffic associated with this
sub-interface, in this case VLAN 100 traffic you can perform the
following on interface 4/5.
The below example rate-limits VLAN 100 to 100Kbps with a 10Kbps burst.
interface ethernet 4/5
rate-limit input vlan-id 100 100000 10000
rate-limit output vlan-id 100 100000 10000
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
