Tomek,
That is true, but my assumption was that he Allan wanted to simply
limit customer IP traffic. You can apply the shaping per queue as well.
Colin
On 28/01/2009, at 6:37 PM, Tomasz Szewczyk wrote:
Colin,
Rate-limit is different feature than traffic shaping. You can apply
VALN based RL, but as far as I know on XMRs it is not possible for
traffic shaping. Traffic shaping can be applied only per-port.
Tomek
If you then wish to rate-limit all traffic associated with this sub-
interface, in this case VLAN 100 traffic you can perform the
following on interface 4/5.
The below example rate-limits VLAN 100 to 100Kbps with a 10Kbps
burst.
interface ethernet 4/5
rate-limit input vlan-id 100 100000 10000
rate-limit output vlan-id 100 100000 10000
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
