Hi, Spend half day without a luck to do a basic configuration of TCS in pure L2 environment in my recently arrived ServerIronGT EGx2.
I am following this guide http://www.foundrynetworks.co.jp/services/documentation/siug/ServerIron_Cache_Switching.html#5936 Along with ServerIron_10200_xxxx Guides.. But I am stuck here...with "Unrecognized command" so cannot move forward... ServerIron(config)#ip address Unrecognized command ServerIron(config)#ip address Unrecognized command ServerIron(config)#ip de default-network Configure default network route ServerIron(config)#ip default-gate Unrecognized command ServerIron(config)#ip default-gate Unrecognized command ServerIron(config)#ip po. Unrecognized command ServerIron(config)#ip poli policy Enable policy routing ServerIron(config)#ip policy prefer-direct-route Use direct route preference route-map Policy route map ServerIron(config)#ip policy 2 ca Unrecognized command ServerIron(config)#ip policy 2 cache Unrecognized command ServerIron(config)# ServerIron#sh ver SW: Version 10.2.01cTD4 Copyright (c) 1996-2007 Foundry Networks, Inc. Compiled on Sep 04 2008 at 19:17:10 labeled as WXR10201c HW: ServerIronGT E-1 Router, SYSIF version 21, Serial #: Non-exist ========================================================================== SL 1: B0GMR WSM6 Management Module, SYSIF 2, M6, ACTIVE Serial #: CH50050124 0 MB SHM, 1 Application Processors 16384 KB BRAM, SMC version 5, BM version 21 SW: (1)10.2.01cTF2 ========================================================================== SL 2: J-BxG JetCore Gig Fiber Module, SYSIF 2 (Mini GBIC) Serial #: PR13021751 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 89 32768 KB PRAM and 2M-Bit*1 CAM for IGC 4, version 0449 32768 KB PRAM and 2M-Bit*1 CAM for IGC 5, version 0449 ========================================================================== Active management module: 1.0 GHz Power PC processor 750GX (version 7002/0102) 66 MHz bus 512 KB boot flash memory 16384 KB code flash memory 512 KB SRAM 512 MB DRAM The system uptime is 3 hours 24 minutes 6 seconds Really appreciate if anyone can shed some light in this and help me with some tips to configure the TCS. Lan/Router<-->ServerIronGT<-->Wan/Router | Web Proxy Farm Regards, Samit _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
