Hi Samit,
You have to create some health checks and bind them to the port.
Something like:
server port 3128
tcp keepalive 5 3
server port 80
tcp keepalive 5 3
healthck squid tcp
dest-ip 192.168.0.104
port 3128
protocol http
protocol http url "GET /"
healthck www tcp
dest-ip 192.168.0.104
port http
protocol http
protocol http url "GET /"
healthck squid1 boolean
and squid www
server cache-name squid1 192.168.0.104
no-l3-check
port 3128 healthck squid1
port http
port http url "GET /"
This will basically bind port 3128 and http together, which means that
when port http fails, it will also fail 3128.
The "sh healthck" command will tell you the status.
Total nodes: 3; Max nodes: 128
Name Value Enable Type Dest-IP Port
Proto Layer
--------------------------------------------------------------------------
squid N/A YES tcp 192.168.0.104 3128
http l4-chk
www N/A YES tcp 192.168.0.104 http
http l4-chk
squid1 N/A na and squid www
Hope this helps.
I would also suggest to upgrade your platform to something more
current. 10.2.01 for example.
Mischa
On Mar 13, 2009, at 09:22, Samit wrote:
Hi,
I got basic TCS working which I found straight forward. However I want
my proxy health check to be done on port 80 (which is internally
redirected to port 3128 by proxy server) but the customer web traffic
redirection should go to port 3128. Similarly, I also need to bypass
some of my specific customers traffic going into proxy. How to achieve
this in ServerIronGT EGx2. I have this setup working in my Alteon but
not able to do it in ServerIron perhaps being a newbie in Foundry.
Thanks.
My test config:
server port 3128
tcp
server port 80
tcp
!
server cache-name squid1 192.168.0.104
no-l3-check
port 3128
port http
port http url "GET /"
server cache-group 1
cache-name squid1
ip policy 1 cache tcp http local
interface ethernet 2/1
ip-policy 1
interface ethernet 2/8
ip-policy 1
SLB-ServerIron#sh ver
SW: Version 09.4.00tTD2 Copyright (c) 1996-2003 Foundry Networks,
Inc.
Compiled on Dec 06 2006 at 02:46:26 labeled as WXM09400t
(3904062 bytes) from Secondary WXM09400t.bin
HW: ServerIronGT E-1 Switch, SYSIF version 21, Serial #: Non-exist
=
=
=
=
======================================================================
SL 1: B0GMR WSM6 Management Module, SYSIF 2, M6, ACTIVE
Serial #: CH50050124
0 MB SHM, 1 Application Processors
16384 KB BRAM, SMC version 5, BM version 21
SW: (1)09.4.00tTF2
=
=
=
=
======================================================================
SL 2: J-BxG JetCore Gig Fiber Module, SYSIF 2 (Mini GBIC)
Serial #: PR13021751
4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 89
32768 KB PRAM and 2M-Bit*1 CAM for IGC 4, version 0449
32768 KB PRAM and 2M-Bit*1 CAM for IGC 5, version 0449
=
=
=
=
======================================================================
Active management module:
1.0 GHz Power PC processor 750GX (version 7002/0102) 66 MHz bus
512 KB boot flash memory
16384 KB code flash memory
512 KB SRAM
512 MB DRAM
The system uptime is 3 hours 1 minutes 47 seconds
The system : started=warm start reloaded=by "reload"
Regards,
Samit
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
