Thanks Mischa, I am yet to get the latest L2 code from my vendor, in the meantime I am testing it by booting my system using the secondary code which is luckily happened to be a L2 code :).
It seem to work as per your suggested config, however I also need to test bypassing some of my specific customers and specific dst traffic going into proxy, I am going through the policy based caching sections of the doc but still any tips in advance would be appreciated. Regards, Samit Mischa Peters wrote: > Hi Samit, > > You have to create some health checks and bind them to the port. > Something like: > > server port 3128 > tcp keepalive 5 3 > > server port 80 > tcp keepalive 5 3 > > healthck squid tcp > dest-ip 192.168.0.104 > port 3128 > protocol http > protocol http url "GET /" > > healthck www tcp > dest-ip 192.168.0.104 > port http > protocol http > protocol http url "GET /" > > healthck squid1 boolean > and squid www > > server cache-name squid1 192.168.0.104 > no-l3-check > port 3128 healthck squid1 > port http > port http url "GET /" > > This will basically bind port 3128 and http together, which means that > when port http fails, it will also fail 3128. > > The "sh healthck" command will tell you the status. > > Total nodes: 3; Max nodes: 128 > Name Value Enable Type Dest-IP Port Proto > Layer > -------------------------------------------------------------------------- > squid N/A YES tcp 192.168.0.104 3128 http > l4-chk > www N/A YES tcp 192.168.0.104 http http > l4-chk > squid1 N/A na and squid www > > Hope this helps. > > I would also suggest to upgrade your platform to something more current. > 10.2.01 for example. > > Mischa > > On Mar 13, 2009, at 09:22, Samit wrote: > >> Hi, >> >> I got basic TCS working which I found straight forward. However I want >> my proxy health check to be done on port 80 (which is internally >> redirected to port 3128 by proxy server) but the customer web traffic >> redirection should go to port 3128. Similarly, I also need to bypass >> some of my specific customers traffic going into proxy. How to achieve >> this in ServerIronGT EGx2. I have this setup working in my Alteon but >> not able to do it in ServerIron perhaps being a newbie in Foundry. >> >> Thanks. >> >> My test config: >> >> server port 3128 >> tcp >> >> server port 80 >> tcp >> ! >> server cache-name squid1 192.168.0.104 >> no-l3-check >> port 3128 >> port http >> port http url "GET /" >> >> server cache-group 1 >> cache-name squid1 >> >> ip policy 1 cache tcp http local >> >> interface ethernet 2/1 >> ip-policy 1 >> >> interface ethernet 2/8 >> ip-policy 1 >> >> >> SLB-ServerIron#sh ver >> SW: Version 09.4.00tTD2 Copyright (c) 1996-2003 Foundry Networks, Inc. >> Compiled on Dec 06 2006 at 02:46:26 labeled as WXM09400t >> (3904062 bytes) from Secondary WXM09400t.bin >> HW: ServerIronGT E-1 Switch, SYSIF version 21, Serial #: Non-exist >> ========================================================================== >> >> SL 1: B0GMR WSM6 Management Module, SYSIF 2, M6, ACTIVE >> Serial #: CH50050124 >> 0 MB SHM, 1 Application Processors >> 16384 KB BRAM, SMC version 5, BM version 21 >> SW: (1)09.4.00tTF2 >> ========================================================================== >> >> SL 2: J-BxG JetCore Gig Fiber Module, SYSIF 2 (Mini GBIC) >> Serial #: PR13021751 >> 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 89 >> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 4, version 0449 >> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 5, version 0449 >> ========================================================================== >> >> Active management module: >> 1.0 GHz Power PC processor 750GX (version 7002/0102) 66 MHz bus >> 512 KB boot flash memory >> 16384 KB code flash memory >> 512 KB SRAM >> 512 MB DRAM >> The system uptime is 3 hours 1 minutes 47 seconds >> The system : started=warm start reloaded=by "reload" >> >> Regards, >> Samit >> >> >> >> _______________________________________________ >> foundry-nsp mailing list >> [email protected] >> http://puck.nether.net/mailman/listinfo/foundry-nsp > > > _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
