I might be missing something here but it won't show up because it's not
a directly connected route:
s...@frontend_bigironb#sh run | in route 0.0.0.0
ip route 0.0.0.0 0.0.0.0 x.y.z.1
s...@frontend_bigironb#sh ip ro direct | in ^[ ]*0.0.0.0
s...@frontend_bigironb#sh ip ro static | in ^[ ]*0.0.0.0
0.0.0.0 0.0.0.0 x.y.z.1 v133 1
s...@frontend_bigironb#
HTH,
Col
Joseph Hardeman wrote:
> Greetings,
>
> I was wondering if anyone might know why when I add an IP to an External
> facing Interface and add "ip route 0.0.0.0 0.0.0.0 EXTERNALIP distance
> 240" in the config, why when I do a "sh ip route direct" it would not
> show up in the output? I have added "ip policy prefer-direct-route" to
> the BI8000 but I do not see that IP in the routing table, nor is it
> pingable from outside of our network. It is a public facing IP. I have
> tried different LX modules and also different ports on two different
> cards on that system.
>
> Thanks
>
> Joe
> _______________________________________________
> foundry-nsp mailing list
> [email protected]
> http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
