Make sure EXTERNALIP is an IP which is reachable from the switch and
part of a locally configured subnet on the router/switch, also make sure
the interface is up
Joseph Hardeman wrote:
Greetings,
I was wondering if anyone might know why when I add an IP to an
External facing Interface and add "ip route 0.0.0.0 0.0.0.0 EXTERNALIP
distance 240" in the config, why when I do a "sh ip route direct" it
would not show up in the output? I have added "ip policy
prefer-direct-route" to the BI8000 but I do not see that IP in the
routing table, nor is it pingable from outside of our network. It is
a public facing IP. I have tried different LX modules and also
different ports on two different cards on that system.
Thanks
Joe
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
--
Met vriendelijke groet,
Jeroen Wunnink,
EasyHosting B.V. Systeembeheerder
[email protected]
telefoon:+31 (035) 6285455 Postbus 48
fax: +31 (035) 6838242 3755 ZG Eemnes
http://www.easyhosting.nl
http://www.easycolocate.nl
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
