On 29.04.2009 05:09, Monjural Islam wrote:
> Hi,
> Can anyone tell how we can mirror vlan or trunk port in edgeiron 48G
switch.
> Thanks
> Monjural Islam
i did something like:
source = port that has some traffic that i want to view
target = port that is connected to my monitoring box
1st: add target to source's vlan
then
1. conf t
2. int e 1/target
3. port monitor ethernet 1/source
4. end
5. show port mon
> Port Mirroring
> -------------------------------------
> Destination port (listen port): Eth1/48
> Source port (monitored port) : Eth1/27
> Mode :RX/TX
so now i will receive all rx/tx traffic from source port 27 to target
port 48.
notice: it is seems very important to add the target port to the
source's vlan.
my config:
# show sys
> Vty-0#show sys
> System description: Foundry Networks EdgeIron 4802CF
> System OID string: 1.3.6.1.4.1.1991.1.5.1.1.4.3.1
> ...
cheers,
raoul
--
____________________________________________________________________
DI (FH) Raoul Bhatia M.Sc. email. [email protected]
Technischer Leiter
IPAX - Aloy Bhatia Hava OEG web. http://www.ipax.at
Barawitzkagasse 10/2/2/11 email. [email protected]
1190 Wien tel. +43 1 3670030
FN 277995t HG Wien fax. +43 1 3670030 15
____________________________________________________________________
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
