hi, Thanx for reply, I would also like to know is port mirroring across VLANs supported in Edgeiron 48G or not. Also,in our network,multiple port based VLANs are configured,how can we mirror all Vlans traffic(configured on edgeiron 48G). I read in the documentation the edgeiron 48G support only one port mirror session. Thanks
On Fri, May 1, 2009 at 10:22 PM, Raoul Bhatia [IPAX] <[email protected]>wrote: > On 29.04.2009 05:09, Monjural Islam wrote: > > Hi, > > Can anyone tell how we can mirror vlan or trunk port in edgeiron 48G > switch. > > Thanks > > Monjural Islam > > i did something like: > > source = port that has some traffic that i want to view > target = port that is connected to my monitoring box > > 1st: add target to source's vlan > > then > 1. conf t > 2. int e 1/target > 3. port monitor ethernet 1/source > 4. end > 5. show port mon > > Port Mirroring > > ------------------------------------- > > Destination port (listen port): Eth1/48 > > Source port (monitored port) : Eth1/27 > > Mode :RX/TX > > so now i will receive all rx/tx traffic from source port 27 to target > port 48. > > notice: it is seems very important to add the target port to the > source's vlan. > > my config: > # show sys > > Vty-0#show sys > > System description: Foundry Networks EdgeIron 4802CF > > System OID string: 1.3.6.1.4.1.1991.1.5.1.1.4.3.1 > > ... > > cheers, > raoul > -- > ____________________________________________________________________ > DI (FH) Raoul Bhatia M.Sc. email. [email protected] > Technischer Leiter > > IPAX - Aloy Bhatia Hava OEG web. http://www.ipax.at > Barawitzkagasse 10/2/2/11 email. [email protected] > 1190 Wien tel. +43 1 3670030 > FN 277995t HG Wien fax. +43 1 3670030 15 > ____________________________________________________________________ >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
