I am experimenting with a Foundry NI-MLX-4. I have a fast-E trunk to a Cisco router on eth 3/3 and another fast-E trunk to a Cisco 3750 on eth 3/20
The router has IP address 10.0.1.1/24 The MLX router has IP address 10.0.1.2/24 The 3750 has IP address 10.0.1.3/24 >From the MLX-4 I can ping both Cisco devices, but from either Cisco I cannot ping the other. Spanning tree on the devices show the proper ports are forwarding, but no traffic is passing. Any ideas ? = K -------------------- MLX Config: vlan 1024 name Spantree_Test tagged ethe 3/4 ethe 3/20 router-interface ve 1024 ! interface ve 1024 ip address 10.0.1.2/24 ! ---------------------- MLX4-01#ping 10.0.1.1 Sending 1, 16-byte ICMP Echo to 10.0.1.1, timeout 5000 msec, TTL 64 Type Control-c to abort Reply from 10.0.1.1 : bytes=16 time=271ms TTL=255 Success rate is 100 percent (1/1), round-trip min/avg/max=0/0/0 ms. MLX4-01#ping 10.0.1.3 Sending 1, 16-byte ICMP Echo to 10.0.1.3, timeout 5000 msec, TTL 64 Type Control-c to abort Reply from 10.0.1.3 : bytes=16 time<1ms TTL=255 Success rate is 100 percent (1/1), round-trip min/avg/max=0/0/0 ms. ======================= 3750-01#ping 10.0.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.0.1.1, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) 3750-01#
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
