[email protected] wrote: > Most of it are FES-4802-POE > > > > >
On the FES switches, basic ToS-based QoS is enabled by default, but if it has been disabled: sw(config)# port-priority sw(config)# write memory *requires reload To set the trust level for an interface to IP Precedence, enter the following command at the configuration level for the interface: sw(config-if-1/1)# qos-tos trust dscp To change the DSCP –> internal forwarding priority mappings: sw(config)# qos-tos map dscp-priority 46 to 6 If you have any L3 interfaces on the switch, then there are some additional config lines to add. /Eric _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
