Ok, I now have a little more idea on what is causing my problems. Its VRRP causing my ip policy route-map to not work. When I remove VRRP from a VLAN I am testing with my route-map works properly but stops working when I re-apply the VRRP Config.
Any ideas on why VRRP would break a ip policy route-map? Thanks everyone Joe On Mon, Feb 15, 2010 at 12:32 AM, Joseph Hardeman <[email protected]>wrote: > Hi Everyone, > > I have a question about Policy based routing. I have setup my access-list > and route-map like the examples I have found online and also tried it with > the example in a Manual I have for the Foundry. On a VLAN with multiple > subnets its not working. I have all of the subnets included right now in > the access-list I setup and I have set the next-hop in my route-map, but I > can't seem to get it to send that traffic through the next hop I want too. > It is instead using BGP routing to send the traffic out for these subnets. > > interface ve 200 > ip address a.a.a.a 255.255.255.128 > ip address b.b.b.b 255.255.255.128 > ip address c.c.c.c 255.255.255.0 > ip address d.d.d.d 255.255.255.128 > ip policy route-map test-next-hop > > access-list 30 permit a.a.a.a 0.0.0.127 > access-list 30 permit c.c.c.c 0.0.0.255 > access-list 30 permit b.b.b.b 0.0.0.127 > access-list 30 permit d.d.d.d 0.0.0.127 > access-list 30 permit e.e.e.e 0.0.0.127 > > route-map test-next-hop permit 10 > match ip address 30 > set ip next-hop z.z.z.z > > > When I apply this route-map to a vlan with a single subnet it works just > fine and is sending the outbound traffic to the next hop I told it to, just > not on the vlan with multiple subnets. Anyone know why it might be having > this problem? And how to fix it? > > Thanks for any insight or help. > > Joe >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
