You might also need to set some additional settings. The default maximum route cache is too small for a full ipv4 table. Try increasing the following:
system-max ip-route system-max ip-cache The default for ip-route is 102400 with 4.0.1 which is what I am running. So while BGP will handle more, they won't get installed in the routing table unless you increase system-max ip-route. I currently have 314292 routes installed and I believe I have the maximum currently set to 350000 George On Tue, Feb 16, 2010 at 2:40 PM, Niels Bakker <[email protected]>wrote: > * [email protected] (Chuck Ufarley) [Tue 16 Feb 2010, 22:42 CET]: > > Is anyone running a full BGP table on an NI-MLX-MR blade with 2GB RAM >> (which is max RAM, per the Foundry part list)? Any luck on that? Is it >> possible? >> > > It's possible but you'll have to manually select a non-default CAM profile > to allow for more routes in the hardware. Default is 262,144 which is not > enough for today's Internet full routing table. > > See the "cam-partition" command in the manual, you'll want "ipv4" or > "ipv4-ipv6-2" - no VPNs/VRFs then anymore, though. > > > -- Niels. > > -- > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
