I have gig-default neg-off They have a test unit. They can link fine to my units with their test unit. They can link to their switch with their test unit. I can link between my switches no problem. Our switch can not link to their switch.
I am going to get a tech on the phone here soon and get their configuration sorted, if they will let me look at the port config. On Thu, Mar 11, 2010 at 2:12 PM, Nuno Vieira - nfsi telecom < [email protected]> wrote: > did you tried gig-default neg-off on the interface ? > > are you really getting light on the fibre ? (can you test if you got loss, > orso?) > > regards, > --nvieira > > > > ----- "George B." <[email protected]> wrote: > > I am working on a new deployment in Verizon data center in Europe. We have > an MLX with LX optics. Our two routers link fine but when we connect the > uplinks to Verizon, no link. I have tried everything I know such as rolling > xmit/receive, changing negotiation, etc. The config is REALLY simple, just > an IP address, route-only on the interface, and no spanning-tree. Links > fine between MLX units, will not link to Verizon's cisco. > > I recall having this same problem with vendors using Cisco in the past > (Level3, Savvis UK) and it took them a while to figure it out but they have > always done something that allowed things to work eventually. Anyone have > the magic clue I can pass to VZB to make this thing work? > > > > _______________________________________________ > foundry-nsp mailing list > > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > > >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
