Am 11.03.10 22:15, schrieb George B.: > I am working on a new deployment in Verizon data center in Europe. We > have an MLX with LX optics. Our two routers link fine but when we > connect the uplinks to Verizon, no link. I have tried everything I know > such as rolling xmit/receive, changing negotiation, etc. The config is > REALLY simple, just an IP address, route-only on the interface, and no > spanning-tree. Links fine between MLX units, will not link to Verizon's > cisco. > > I recall having this same problem with vendors using Cisco in the past > (Level3, Savvis UK) and it took them a while to figure it out but they > have always done something that allowed things to work eventually. > Anyone have the magic clue I can pass to VZB to make this thing work?
If you have an solution - let me hear. I'am still unable to connect a new XMR to an old Cat5000/SUP3 with GE-SX. Because I've tried any combination of interface settings on both the XMR and the Cat5000 side, I doubt that they ever will see each other (I hadn't this problem with our oldish Foundry NI800). -- Gerald _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
