Port typo corrected in group1 SWITCH A TRUNK Group1 e1/1 to 1/4 e2/1 to 2/4
SWITCH B TRUNK Group1 e1/1 to 1/4 e2/1 to 2/4 On Fri, Mar 19, 2010 at 4:49 PM, Gary H <[email protected]> wrote: > I can't find an example of multi trunking VLANs between two switches to > maximize Group1 and Group2 8GB trunk per vlan. Think this will work? (proper > syntax not used) Is the Group2 trunk going to require tagged trunk ports and > as a result, carry all the VLANs and then create a loop? > > VLAN 1 (default vlan) contains dual mode ports, but trunk shouldn't need > dual mode > > SWITCH A TRUNK Group1 > e1/2 to 1/4 > e2/1 to 2/4 > > SWITCH B TRUNK Group1 > e1/2 to 1/4 > e2/1 to 2/4 > > > VLAN 2 contains tagged ports and untagged ports and IP Subnet voice traffic > > SWITCH A TRUNK Group2 > e1/5 to 1/8 > e2/5 to 2/8 > > SWITCH B TRUNK Group2 > e1/5 to 1/8 > e2/5 to 2/8 > > Thank you > Gary >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
