No It won't create loop. You have to tag ports first then create a trunk. Vlan 10 Tag e 1/5 to 1/8 Vlan 11 Tag e1/5 to 1/8
Then create a trunk group. Older codes require you to do port /vlan config first before you deploy trunk Then Trunk ports .. Deploy Thanks, Pritesh From: [email protected] [mailto:[email protected]] On Behalf Of Gary H Sent: Friday, March 19, 2010 1:54 PM To: [email protected] Subject: Re: [f-nsp] Multi Trunking separate VLANs between 2 switches Port typo corrected in group1 SWITCH A TRUNK Group1 e1/1 to 1/4 e2/1 to 2/4 SWITCH B TRUNK Group1 e1/1 to 1/4 e2/1 to 2/4 On Fri, Mar 19, 2010 at 4:49 PM, Gary H <[email protected]<mailto:[email protected]>> wrote: I can't find an example of multi trunking VLANs between two switches to maximize Group1 and Group2 8GB trunk per vlan. Think this will work? (proper syntax not used) Is the Group2 trunk going to require tagged trunk ports and as a result, carry all the VLANs and then create a loop? VLAN 1 (default vlan) contains dual mode ports, but trunk shouldn't need dual mode SWITCH A TRUNK Group1 e1/2 to 1/4 e2/1 to 2/4 SWITCH B TRUNK Group1 e1/2 to 1/4 e2/1 to 2/4 VLAN 2 contains tagged ports and untagged ports and IP Subnet voice traffic SWITCH A TRUNK Group2 e1/5 to 1/8 e2/5 to 2/8 SWITCH B TRUNK Group2 e1/5 to 1/8 e2/5 to 2/8 Thank you Gary
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
