Hello, On some FESX448's I have I am trying to add a trunk port (eth 9 to 10) to vlan 30 untagged.
It is a tagged member of other vlans. When trying to place them untagged into the vlan I get this error message. s...@lvretailfesx06(config-vlan-30)#untagged ethernet 9 to 10 error - port ethe 9 to 10 are not member of default vlan Been going through the docs but not finding out anything with this error. Port info s...@lvretailfesx06(config-vlan-30)#sh inter eth 9 GigabitEthernet9 is up, line protocol is up Hardware is GigabitEthernet, address is 0012.f28d.2cc0 (bia 0012.f28d.2cc8) Configured speed auto, actual 1Gbit, configured duplex fdx, actual fdx Configured mdi mode AUTO, actual MDI Member of 4 L2 VLANs, port is tagged, port state is FORWARDING BPDU guard is Disabled, ROOT protect is Disabled Link Error Dampening is Disabled STP configured to ON, priority is level0 Flow Control is config enabled, oper enabled, negotiation disabled mirror disabled, monitor disabled Member of active trunk ports 9-10, primary port Member of configured trunk ports 9-10, primary port No port name IPG MII 96 bits-time, IPG GMII 96 bits-time IP MTU 1500 bytes, encapsulation ethernet 300 second input rate: 56 bits/sec, 0 packets/sec, 0.00% utilization 300 second output rate: 4144 bits/sec, 5 packets/sec, 0.00% utilization 51148 packets input, 21116705 bytes, 0 no buffer Received 1162 broadcasts, 2259 multicasts, 47727 unicasts 0 input errors, 0 CRC, 0 frame, 0 ignored 0 runts, 0 giants 27329907 packets output, 2754285747 bytes, 0 underruns Transmitted 5554345 broadcasts, 20651264 multicasts, 1124298 unicasts 0 output errors, 0 collisions Thanks! Joseph _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
